|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Reference Information Dimensions Note: All dimensions are shown in mm. Divide by 25.4 to convert millimeters into inches. J CJ1 Product Dimensions Unit/product Power Supply Unit www..com Power Supply Unit pp y CPU Unit Model number CJ1W-PA205R CJ1W-PA202 CJ1W-PD025 CJ1M-CPU11/12/13 CJ1M-CPU21/22/23 CJ1H-CPUjjj CJ1G-CPUjjj Width 80 45 60 31 49 62 14.7 CJ1M-CPU11/12/13 End Cover CJ1W-TER01 CJ1M-CPU21/22/23 J Example Rack Widths using CJ1WPA202 Power Supply Unit (AC, 14 W) No. of Units mounted with t d ith 31-mm width 1 2 3 4 5 6 7 8 9 10 Rack width (mm) With CJ1MCPU12/13 121.7 152.7 183.7 214.7 245.7 276.7 307.7 338.7 369.7 400.7 With CJ1MCPU22/23 139.7 170.7 201.7 232.7 263.7 294.7 325.7 356.7 387.7 418.7 With CJ1G or CJ1H CPU Unit 152.7 183.7 214.7 245.7 276.7 307.7 338.7 369.7 400.7 431.7 Programmable Controller CJ1 B-131 Reference Information Dimensions Note: All dimensions are shown in mm. Divide by 25.4 to convert millimeters into inches. J Units of Width 20 mm Unit I/O Control Module 32Basic-point I/O Modules p / B7A Interface Unit Model number CJ1W-IC101 CJ1W-ID231/232 CJ1W-OD231/232 CJ1W-B7A22 CJ1W-B7A14 CJ1W-B7A04 CJ1W-SRM21 Width 20 Units of Width 31 mm Unit I/O Interface Module 8/16-point Basic I/O Modules Model number CJ1W-II101 CJ1W-ID201 CJ1W-ID211 CJ1W-IA111/201 CJ1W-OD201/202/203/204 CJ1W-OD211/212 CJ1W-OC201/211 CJ1W-OA201 CJ1W-MD231 CJ1W-MD232 CJ1W MD232 CJ1W-MD233 CJ1W-ID261 CJ1W-ID262 CJ1W-OD261 CJ1W-OD262 CD1W-MD262 CJ1W-OD263 CD1W-MD261 CD1W-MD263 CD1W-MD563 CJ1W-INT01 CJ1W-IDP01 CJ1W-ADjjj CJ1W-DAjjj CJ1W-MAD42 CJ1W-TCjjj CJ1W-NC113/133 CJ1W-NC213/233 CJ1W-NC413/433 CJ1W-CT021 CJ1W-V600C11 CJ1W-V600C12 CJ1W-CLK21-V1 CJ1W-SCU41 CJ1W-ETN21 CJ1W-DRM21 CJ1W-PRT21 CJ1W-PRM21 Width 31 CompoBus/S Master Module 32-point Basic I/O Modules 64-point Basic I/O Modules I/O Control www..com Unit Interrupt Input Module High Speed Input Module Analog I/O Module 32-point I/O Units (CJ1W-ID23j/OD23j) Temperature Control Units Position Control Units High-speed Counter Unit ID Sensor Unit Controller Link Module Serial Communications Unit Ethernet Module DeviceNet Module ProfiBus-DP Slave ProfiBus-DP Master B-132 Programmable Controller CJ1 Reference Information Dimensions I/O Interface Unit 8/16-point Basic I/O Units, Interrupt Input Unit, and High-speed Input Unit J Mounting Height The mounting height of CJ1 Series CPU Racks and Expansion Racks is from 81.6 to 89.0 mm, depending on the Modules that are mounted. Additional height is required to connect Programming Devices (e.g., CX-Programmer or Programming Console) and Cables. Be sure to allow sufficient mounting height. Approx. 100 to 150 mm www..com 64-point Basic I/O Units and 32-point Basic I/O Units (CJ1W-MD23j) 81.6 to 89.0 mm Note: Consider the following points when expanding the configuration: Special I/O Units and CPU Bus Units * * The total length of I/O Connecting Cable must not exceed 12 m. I/O Connecting Cables require the bending radius as indicated in the CS/CJ-series Connecting Cable. CS/CJ-series Connecting Cable R 69 mm J Mounting Dimensions Note: Outer diameter of cable: 8.6 mm. DIN Track model number PFP-100N2 PFP-100N PFP-50N 16 mm 7.3 mm 7.3 mm A Programmable Controller CJ1 B-133 Reference Information CJ1 system Configuration Worksheets J Worksheet 1 CPU Rack Required Parts CPU -- Note: CJ1M-CPU1j requires 0.58 A, CJ1M-CPU2j requires 0.64 A, CJ1G requires 0.91 A, SJ1H requires 0.99 A Module 1 2 3 4 5 6 7 8 9 10 CJ1W-IC101 0.02 A at 5V If CJ1 Modules exceed ten per system, an additional rack is required. The CJ1W will attach to a CJ1W-II101 in the expansion rack. 1 Optional Parts Memory Card (FLASH) Programming Cable (Peripheral cable) CX-Programmer Programming Software Remote I/O Touch Screens/Cables/Terminal Blocks/Other Software/Etc. Current Consumption Description 1 1 1 1 1 1 1 1 1 1 Qty. 1 Part Number(s) Selected www..com TOTALS: Power Supply: Note: Make copies of this worksheet for system configuration and planning. B-134 Programmable Controller CJ1 Reference Information CJ1 system Configuration Worksheets J Worksheet 2 Expansion Rack #_____ Required Parts I/O Expansion Cables (CS1W-CNjj3) I/O Expansion Module CJ1W-II101 (Current consumption 0.13 A at 5V) Module 1 2 3 4 5 6 7 8 9 10 CJ1W-IC101 0.02 A at 5V If CJ1 Modules exceed ten per system, an additional rack is required. The CJ1W will attach to a CJ1W-II101 in the expansion rack. Current Consumption Description 1 1 1 1 1 1 1 1 1 1 Qty. 1 1 Part Number(s) Selected CS1W-CN _________ CJ1W-II101 www..com TOTALS: Power Supply: Other Note: Make copies of this worksheet for system configuration and planning. Programmable Controller CJ1 B-135 |
Price & Availability of CJ1 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |